SK-8, Awomix as welding gas
SK-8 Awomix is a welding gas. Argon provides protection and uniformity to the weld, while carbon dioxide strengthens the joint’s durability.

The precise composition of the mixture is specifically designed for MAG welding of unalloyed and low alloy steels. Its composition supports stable arc formation, adequate penetration and low spatter generation, making it particularly suitable for welding thin and thin-skinned materials. The gas promotes uniform melt behaviour and reduces the formation of oxide deposits, facilitating weld cleaning and improving the quality of the final result. SK-8 Awomix is widely used in the engineering industry, metal fabrication and other applications where a reliable shielding gas is required for joining steel.

Available grades:
Industrial SK-8, Awomix

Packaging:
SK-8, Awomix gas is available in cylinders and cylinder packs.

Gases behave differently depending on their quality and state. Always consult the product’s safety data sheet before using the product. A safety data sheet is a document that conveys information about the properties, risks and safe use of a substance or mixture for industrial or professional use.

Risk of suffocation
SK-8, Increased concentration of Awomix gas in the breathing air poses a choking hazard. Low concentrations may cause increased respiratory rate and headache. Asphyxiation occurs unnoticed and can be fatal. As the air becomes heavier, it may accumulate in drains and basements and cause elevated concentrations of SK-8, Awomix gas in the premises.

First aid
A person suffering from oxygen deficiency should be immediately evacuated to fresh air. If the victim is having difficulty breathing or is not breathing, administer artificial respiration as quickly as possible and call for help. When rescuing a victim, it is important to remember not to enter an oxygen-deprived area without breathing equipment.

Use
– When handling the substance, follow the instructions and safe working practices given
– The gas handler must be properly trained
– Use only carefully checked pressure regulators and other operating equipment suitable for this gas. If in doubt, contact Woikoske.
– Open the valve slowly to avoid pressure shock
– The valve is opened and closed by hand. The use of assistive devices is prohibited!
– It takes about one turn to open the bottle.
– The cylinder in use must be properly secured.
– Keep the valve outlets clean!
– Close the cylinder valve after each use and when the cylinder is empty.
– Always report damaged valves and cylinders to Woikoske.

Transport
– The driver must be aware of the potential hazards of the load and know his duties in the event of accidents and incidents.
– Cylinders should be transported in an upright position
– The load must be secured
– Cylinders must not be knocked, thrown or dropped from the truck platform
– Attention to ADR regulations during transport

Storage
– Observe all legal and local requirements for the storage of cylinders.
– Store cylinders in a well ventilated area
– Cylinders should not be stored in conditions that promote corrosion
– Cylinders are stored upright and secured so that they cannot fall over
– Valve guards must be in place AT ALL TIMES
– Empty and full cylinders to be kept separate