TIG-hitsauskoneet

Picotig 200 puls TG.  Gas-cooled DC TIG inverter welding machine  5 A - 200 A

EWM Picotig 200 puls TG

  • 1 X 230 V
  • Gas-cooled DC TIG inverter welding machine
  • TIG welding with reproducible, electronic HF start
  • TIG lift arc welding without HF
  • MMA pulse welding and pulsed TIG welding up to 2 kHz
  • Non-latched/latched operation
  • Clearly structured operating panel, operating elements streamlined to feature the main TIG functions
  • Reduced secondary current accessible using torch trigger
  • Up-slope/down-slope adjustable
  • Adjustable gas pre-flows/post-flows
 

 

Tetrix 230 Comfort 2.0 puls 8P TM.  Modular TIG welding machine, DC  Can be flexibly extended with trolley and cooling unit  3 A - 230 A

EWM Tetrix 230 Comfort 2.0 puls 8P TM

  • 1 x 230 V
  • Modular DC TIG inverter welding machine, gas- or water-cooled
  • Comfort 2.0 control, simple operation with click wheel
  • TIG welding
  • Features characteristics for EWM activArc and EWM spotArc at no extra charge
  • TIG welding with reproducible, electronic HF start
  • TIG lift arc welding without HF
  • TIG automated pulsing with automatic specification of required pulse parameters
  • Pulsed TIG welding in Hz and kHz range up to 15 kHz
  • 8 programmed JOBs (welding tasks)
  • Non-latched/latched operation
  • Clearly structured operating panel, operating elements streamlined to feature the main TIG functions
  • Reduced secondary current accessible using torch trigger
  • Spot welding/tack function (spotArc/spotmatic)
  • spotmatic and spotArc with direct access
  • Up-slope/down-slope adjustable
  • Spotmatic – halves time required for tacking
  • Adjustable gas pre-flows/post-flows
Tetrix 300 Comfort 2.0 puls 8P TM.  Modular TIG welding machine, DC  Can be flexibly extended with trolley and cooling unit  5 A - 300 A

EWM Tetrix 300 Comfort 2.0 puls 8P TM

  • 3 x 400 V
  • Modular DC TIG inverter welding machine, gas- or water-cooled
  • Comfort 2.0 control, simple operation with click wheel
  • TIG welding
  • Features characteristics for EWM activArc and EWM spotArc at no extra charge
  • TIG welding with reproducible, electronic HF start
  • TIG lift arc welding without HF
  • TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification
  • TIG automated pulsing with automatic specification of required pulse parameters
  • Pulsed TIG welding in Hz and kHz range up to 15 kHz
  • 8 programmed JOBs (welding tasks)
  • Non-latched/latched operation
  • Reduced secondary current accessible using torch trigger
  • Spot welding/tack function (spotArc/spotmatic)
  • spotmatic and spotArc with direct access
  • Up-slope/down-slope adjustable
  • Adjustable gas pre-flows/post-flows
Picotig 200 AC/DC puls 8P TG.  Modular TIG welding machine, AC/DC  Can be flexibly extended with trolley and cooling unit  5 A - 200 A

EWM Picotig 200 AC/DC puls 8P TG

  • 1 x 230 V
  • Modular AC/DC TIG inverter welding machine, gas- or water-cooled
  • TIG welding with reproducible, electronic HF start
  • TIG lift arc welding without HF
  • Adjustable AC waveform, sine, trapezoidal, square current
  • Adjustable AC frequency between 50 Hz and 200 Hz
  • Adjustable AC balance
  • TIG and MMA pulse function
  • Non-latched/latched operation
  • Clearly structured operating panel, operating elements streamlined to feature the main TIG functions
  • Reduced secondary current accessible using torch trigger
  • Up-slope/down-slope adjustable
  • Adjustable gas pre-flows/post-flows
Tetrix 230 AC/DC Comfort 2.0 puls 8P TM.  Modular TIG welding machine, AC/DC  Can be flexibly extended with trolley and cooling unit  3 A - 230 A

EWM Tetrix 230 AC/DC Comfort 2.0 puls 8P TM

  • Modular AC/DC TIG inverter welding machine, gas- or water-cooled
  • Comfort 2.0 control, simple operation with click wheel
  • TIG welding
  • Features characteristics for EWM activArc and EWM spotArc at no extra charge
  • TIG welding with reproducible, electronic HF start
  • TIG lift arc welding without HF
  • Special AC welding procedure to join markedly different aluminium plates together, e.g. welding 1-mm-sheet to a 10-mm-plate
  • Adjustable AC waveform, sine, trapezoidal, square current
  • Adjustable AC frequency between 50 Hz and 200 Hz
  • Adjustable AC balance
  • TIG automated pulsing with automatic specification of required pulse parameters
  • Pulsed TIG welding in Hz and kHz range up to 15 kHz
  • 8 programmed JOBs (welding tasks)
  • Non-latched/latched operation
  • Clearly structured operating panel, operating elements streamlined to feature the main TIG functions
  • Reduced secondary current accessible using torch trigger
  • Spot welding/tack function (spotArc/spotmatic)
  • Up-slope/down-slope adjustable
  • Spotmatic – halves time required for tacking
  • Adjustable gas pre-flows/post-flows
Tetrix 300 AC/DC Comfort 2.0 puls 8P TM.  Modular TIG welding machine, AC/DC  Can be flexibly extended with trolley and cooling unit  5 A - 300 A

EWM Tetrix 300 AC/DC Comfort 2.0 puls 8P TM

  • Modular AC/DC TIG inverter welding machine, gas- or water-cooled
  • Comfort 2.0 control, simple operation with click wheel
  • TIG welding
  • Features characteristics for EWM activArc and EWM spotArc at no extra charge
  • TIG welding with reproducible, electronic HF start
  • TIG lift arc welding without HF
  • Special AC welding procedure to join markedly different aluminium plates together, e.g. welding 1-mm-sheet to a 10-mm-plate
  • Adjustable AC waveform, sine, trapezoidal, square current
  • Adjustable AC frequency between 30 Hz and 300 Hz
  • Adjustable AC balance, pulse balance
  • Automatic AC frequency
  • TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification
  • TIG automated pulsing with automatic specification of required pulse parameters
  • Pulsed TIG welding in Hz and kHz range up to 15 kHz
  • 8 programmed JOBs (welding tasks)
  • Non-latched/latched operation
  • Reduced secondary current accessible using torch trigger
  • Spot welding/tack function (spotArc/spotmatic)
  • spotmatic and spotArc with direct access
  • Up-slope/down-slope adjustable
  • Spotmatic – halves time required for tacking
  • Adjustable gas pre-flows/post-flows
Taurus 405 Synergic S MM TDM.  Gas-cooled MIG/MAG welding machine with separate wire feeder; choice between drive 4X EX, drive 4X HP or drive 4X LP  5 A - 400 A

EWM Taurus 405 Synergic S MM TDW

  • 3 x 400 V
  • Gas-cooled MIG/MAG welding machine with separate wire feeder; choice between drive 4X EX, drive 4X HP or drive 4X LP
  • Excellent Multimatrix welding characteristics
  • Synergic or manual welding operation
  • Equipped at no extra charge with Synergic characteristics for GMAW welding of steel/CrNi/aluminium
  • Suitable for MMA welding, TIG welding and gouging at no extra charge
  • Large power reserves thanks to high duty cycle with all components heating up less as a result, guaranteeing a longer service life for machines when in use
  • Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355
  • Infinitely adjustable arc dynamics (choke effect)
  • Equipped for 1.0 mm + 1.2 mm steel wire
  • Gas-cooled or optionally water-cooled with cool 50 cooling unit
Taurus 505 Synergic S MM TDM.  Gas-cooled MIG/MAG welding machine with separate wire feeder; choice between drive 4X EX, drive 4X HP or drive 4X LP  5 A - 500 A

EWM Taurus 505 Synergic S MM

  • 3 x 400 V
  • Gas-cooled MIG/MAG welding machine with separate wire feeder; choice between drive 4X EX, drive 4X HP or drive 4X LP
  • Excellent Multimatrix welding characteristics
  • Synergic or manual welding operation
  • Equipped at no extra charge with Synergic characteristics for GMAW welding of steel/CrNi/aluminium
  • Suitable for MMA welding, TIG welding and gouging at no extra charge
  • Large power reserves thanks to high duty cycle with all components heating up less as a result, guaranteeing a longer service life for machines when in use
  • Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355
  • Infinitely adjustable arc dynamics (choke effect)
  • Equipped for 1.0 mm + 1.2 mm steel wire
  • Gas-cooled or optionally water-cooled with cool 50 cooling unit